TEMP. setting button
Each time TEMP + or TEMP - button is pressed, the set temperature will be increased or decreased
Adjusting UTO mode, this button does not function.
AUTO key
When the UTO key, the unit will run under AUTO mode and the swing motor
starts.
When the unit is running, press AUTO key, the unit will be stopped.
Timer control
The unit is turned on or off according to the timer set by the remote controller.
Sleep control
When the air conditioner is in COOL or DRY mode, after Sleep mode has been set properly, the
preset Tset will be increased by ter the sleep program has run for 1 hour, and Tset will be
increased by another 1ºC af
ter 2 hours. Tset has b in two hours. Then the
unit will run at this set temperature and at the set speed.
When the air conditioner is in HEAT mode, after Sleep mode has been set properly, the preset Tset
will be decreased after the sleep program has run for 1 hour, and Tset will be decreased by
ter 2 hours. otally in two hours. Then the unit will
run at this set temperature and at the set speed.
In AUTO or FAN mode, the setting temp. will not change.
Set temp.T
set
1 h 2 h Above 2h
T
set
T
set
T
set
19
MS-SVN22A-EN
by 2 .
range is 61 ~86
. In A
+2 af
een increased by +4 total
increased by another +2 af
+2
+4
1 h 2 h Above 2h
T
set
T
set
T
se
t
Set temp.T
set
-2
-4
by +2
another +2 af
Tset has been increased by +4 t
R
)
R
)
R
)
R
)
R
)
R
)
R
)
R
)
R
)
R
)
R
)
R
)
R
)
Manual switch
unit stops, press A
To Next Page
Loading...
Need help?
General
