GF - A 10
Furnace Sequences Of Operation
Alert Code Recovery
On power up, last 4 Alerts, if any, will be flashed on
the Red Alert LED. The newest Alert detected will
flash first and the oldest last. There will be a 2 second
delay between Alert Code flashes. Solid Red LED error
codes will not be displayed.
The Green BM LED will be on solid when the
control is powered. The Green status LED indicator
light will operate as shown in the table and the Red
LED will flash (one flash) every 20 seconds.
NOTE:
Use the flash code menu for detail of the alerts. Alert
codes also are displayed on the User Interface menu using
a descriptive text message and on the comfort control
display using an alert code number. A complete list of the
alert codes is included with the comfort control.
1
2
Alert Code Recovery
To Next Page
Loading...
