Page 14
CAUTION: in case two units have to be installed side by side, the distance of respect must be doubled.
After the unit has reached the final position, fix the anti-vibration bolts.
4.3
CONTROL OF COMPRESSOR FASTENING
The scroll compressors are fitted on shock absorbers. For fixing through spring anti-vibration mounts, it is necessary to remove
blockages put to fasten the compressors, as indicated on the label on compressors body.
Side of the unit that can be placed next to the wall. This means that with the unit at a distance less
than the optimal one of 700 mm the accessibility to some components is worse but in any case is
ensured even if the unit is leaning against the wall.
Figure 9 - minimum space requirements
[mm] for platform 4 units (sizes form 485 to
620)
To Next Page
Loading...
