Page 21
Example of a possible configuration:
IMPORTANT: No hydraulic kits are provided for the biggest 4 sizes of CCUF (485 ÷ 620)
Optional Hydraulic accessories on the price list
- “Y” water strainer (sold separately), consists of body and stainless steel mesh (*), with replaceable filter through the inspection
cap.
- Automatic water filling (sold separately).
- Water gauges kit
- Victaulic kit (**)
IMPORTANT: water strainer and flow switch must be installed on water circuit (user side) in order to keep the warranty.
Since no water flow control device is installed on the unit, the flow switch is always provided as a loose accessory
(optional) and must be installed by the customer.
(*) Water strainer with meshes not over 0.5mm
(**) A Victaulic kit must be provided for each component to be connected.
In case of selection of external hydraulic kit, it is necessary to provide 1 kit for the unit and 1 kit for the external hydraulic kit
module.
E.g. : CCUF + pump hydraulic kit + water tank + Victaulic kit
Select nr. 3 Victaulic kits (1 kit for unit + 1 kit for pump hydraulic kit + 1 kit for water tank)
CCUF
without hydraulic kit
Hydraulic and electrical connections between hydraulic kit(s)
and the unit are at customer care.
Please consult the electrical drawing of the unit and the
electrical drawing of the hydraulic kit to implement the
electrical connections between them.
Terminals to be connected have the same labels on the
electrical drawing of the unit and on the electrical drawing of
the hydraulic kit. For further support please contact Trane.
The hydraulic kit requires a power supply line of its own.
Double pump hydraulic kit with
To Next Page
Loading...
