MUA-SVX006B-EN
11
• On units with a total length of a 104" (2642mm) or greater, excluding evaporative cooler,
lifting lugs/brackets attached to the base rail are provided. Once the unit is set in place these
lifting brackets may be removed if required.
• Attach rigging to lugs/brackets for lifting the unit. For distance between lifting lugs/brackets
and total unit lengths, refer to the Dimensional Data section of this manual.
Figure 1. Hoisting of Make-Up Air Unit (Single Furnace) Without Lifting Brackets
Figure 2. Hoisting of Make-Up Air Unit (Single Furnace) With Lifting Brackets
GGeenneerraall SSaaffeettyy RReeqquuiirreemmeennttss
To Next Page
Loading...