LED Behavior
MS: Service LED (red)
Situation LED Description
Configured state (Nornal op-
eration)
½ sec. ON, then continously
OFF
The node is configures and
running normally
Non configures state Flashing ½ Hz Node is not configures but
has an application. Proceed
with loading node.
Applicationless state 1 sec. ON, 2 sec. OFF, then
continuously ON
Node has no application, the
LonWorks option needs re-
placing or reprogramming
Watchdog resets Short flash about each 3 sec. Indicates problem with ap-
plication. The LonWorks op-
tion needs replacing
Faulty hardware Steady ON or OFF The LonWorks option needs
replacing
NS: Status LED (green)
Situation LED Description
Node configured Steady ON The node is configured
and running normally
Wink service Flashing ½ Hz for 20 sec. Wink service activated in
order to identify node.
How to install
TR200 LonWorks 4-5
To Next Page
Loading...