Trane LonWorks TR200 - 8-50 Coasting Select; 8-51 Quick Stop Select; 8-52 DC Brake Select; 8-53 Start Select

8-50 Coasting Select
Option: Function:
Select control of the coasting function via the terminals (digital input)
and/or via the bus.
[0] Digital input Activates Start command via a digital input.
[1] Bus Activates Start command via the serial communication port or serial
communication option.
[2] Logic AND Activates Start command via the serial communication bus/serial com-
munication port, AND additionally via one of the digital inputs.
[3] * Logic OR Activates Start command via the serial communication bus/serial com-
munication port OR via one of the digital inputs.
NOTE: This parameter is active only when par.8-01
Control Site is set to [0] Digital and control word .
8-51 Quick Stop Select
Select control of the quick stop function via the terminals (digital input) and/or via the bus.
Option: Function:
[0] Digital Input
[1] Bus
[2] Logic AND
[3] * Logic OR
Note
This parameter is active only when par.8-01
Control Site is set to [0] Digital and control word .
8-52 DC Brake Select
Option: Function:
Select control of the DC brake via the terminals (digital input) and/or via
the serial communication bus.
[0] Digital input Activates Start command via a digital input.
[1] Bus Activates Start command via the serial communication port or serial
communication option.
[2] Logic AND Activates Start command via the serial communication bus/serial com-
munication port, AND additionally via one of the digital inputs.
[3] * Logic OR Activates Start command via the serial communication bus/serial com-
munication port OR via one of the digital inputs.
NOTE: This parameter is active only when par.8-01
Control Site is set to [0] Digital and control word .
8-53 Start Select
Option: Function:
Select control of the adjustable frequency drive start function via the ter-
minals (digital input) and/or via the serial communication bus.
[0] Digital input Activates Start command via a digital input.
[1] Bus Activates Start command via the serial communication port or serial
communication option.
Parameters
8-4 TR200 LonWorks