1. Plug in, press 1/0 button, then
air conditioner is turned on.
DRY mode operation procedure
3. Press SWING button, the louver
start to swing automatically, and
stop when repress it.
4. Press TEMP. button, set suitable
SET TEMP.
2. Press MODE button, set DRY
operation mode. (In DRY mode
indoor fan speed can’t be set.)
13
MCW - SVU03A - E4
3
4
2
1
If room temp. is lower than set temp.,
compressor, outdoor and indoor fan
motor stop.
If room temp. is between ± 2
o
C of set
temp., air conditioner is drying.
If room temp. is higher than set temp.,
it’s at COOL mode, indoor fan speed
can be set.
SET TEMP. should be in range of 16
o
C
to 30
o
C .
To Next Page
Loading...
