Trane R410a - Indicators

12 48663967 Rev 1
Contents
Remote will be in sleep condition after 20 second from last key pressed. Remote wakes up from sleep condition
on rst key pressed and does not sends command to AC unit and update just the display settings.
2.3. Indicators
2.3.1. Indoor
LED 2LED 1
Figure - 4
LED Indication
Unit status LED1 LED2
Stand by RED OFF
Stand by + Error on PCB RED RED
Operating without TRANE mode GREEN OFF
Operating without TRANE mode and Error on PCB GREEN RED
TRANE mode active GREEN GREEN
TRANE mode active + Error on PCB GREEN GREEN and RED Blinks alternately
Button press on remote GREEN blink once No change
Sound Indication
Unit status Buzzer
Unit powered ON – in stand by state
(Mains Power ON)
One short beep
Unit powered ON – in operating state
(Mains Power ON)
One short beep
Unit powered OFF (stand by) / ON using remote One long beep
Button press on remote One short beep