Need help?Do you have a question about the Trane RTCA 108-216 and is the answer not in the manual?
Detailed technical specifications for RTUB unit sizes.
Detailed technical specifications for RTCA condenser unit sizes.
Instructions for connecting chilled water piping to the RTUB evaporator.
Requirements for installing safety valves in the refrigerant system.
Instructions for installing pressure relief valves in the water system.
Instructions for interconnecting the RTUB and RTCA units.
Determining liquid and discharge line sizes based on pressure drops.
Precautions and procedures for pressure testing and leak detection.
Procedure for correctly pumping down the system using a vacuum pump.
Checklist of procedures before putting the unit into service.
Verifying power supply voltage meets specified ranges.
Checking for excessive voltage imbalance between phases.
Ensuring correct L1, L2, L3 phase sequence for motor rotation.
Steps for adding R134a refrigerant to the unit in the field.
Procedures for factory and field charging oil into the unit.
To Next Page
General
