To Next PageTo Next Page
Need help?Do you have a question about the Trane S8V2C080M5PC and is the answer not in the manual?
General| Model | S8V2C080M5PC |
|---|---|
| Type | Gas Furnace |
| Heating Capacity | 80, 000 BTU |
| Efficiency Rating | 80% AFUE |
| Blower Type | Variable Speed |
| Stages | Two-stage |
| Fuel Type | Natural Gas |
| Furnace Type | Upflow/Horizontal |
| Blower Motor | ECM |
| Gas Valve Type | Two-stage |
| Filter Size | 16 x 25 x 1 inches |
| Weight | 150 lbs |
| Vent Diameter | 4 inches |
Covers fire and explosion risks from gas leaks, flammable vapors, and improper handling.
Details risks of electrical shock and carbon monoxide poisoning.
Addresses installation hazards, voltage, overheating, and corrosion risks.
An index of fault codes and corresponding troubleshooting flowcharts.
Troubleshooting steps for flame sensing failures and incorrect gas pressure.
Addresses issues with manifold pressure, flame current, and gas valve operation.
Guides for troubleshooting pressure switch (PS1) faults and inducer motor problems.
Addresses PS2 faults, igniter glow, and inducer motor operation.
Troubleshooting steps for main thermal limit faults related to airflow and temperature.
Troubleshooting for open reverse airflow limit switch faults and motor issues.
Guides for diagnosing and resolving roll-out limit switch faults.
Troubleshooting for sensed flame when the unit should be off, including gas valve checks.
Addresses issues with reversed polarity and missing ground connections.
Troubleshooting for igniter relay faults and igniter circuit problems.
Guides for external gas valve circuit errors and stuck HLO relay faults.
Troubleshooting for low flame sense current, checking sensor location and wiring.
Addresses internal gas valve relay failures and blown/missing fuse faults.
Troubleshooting for blower motor mismatch and file corruption errors.
Diagnosing intermittent low voltage wiring for motor connections.
Troubleshooting incomplete menu data, communication errors, and unresponsive sensors.
Addresses return static pressure transducer and return temperature sensor faults.
