12
TK 56321-18-IM-EN
MMOODDEELLSS 2200 aanndd 5500 OONNLLYY - The power tray must be moved to access unit mounting holes. Refer to the illustration
below.
1. Disconnect the 3-pin plug.
2. Disconnect the 2-pin plug.
3. Remove two screws and one nut securing the tray.
4. Lift tray up off the mounting stud and swing out of the way.
NNoottee:: All components removed will be reinstalled later.
PPrreeppaarriinngg CCoonnddeennsseerr ffoorr IInnssttaallllaattiioonn
To Next Page
Loading...
