38
TK 56321-18-IM-EN
the SPR valve to the correct setting.
12. If the pressure is not within range, remove the protective cap and adjust the SPR valve to the correct setting.
13. Remove gauge manifold set, the additional compound gauge, and the jumper wire when finished with the
procedure.
1. SPR Valve
2. Service Port E-200
3. Service Port Evaporator
SSuuccttiioonn PPrreessssuurree RReegguullaattoorr ((SSPPRR)) AAddjjuussttmmeenntt PPrroocceedduurreess -- MMAAXX 2200
To Next Page
Loading...
