EasyManua.ls Logo

Trane TLF1M087A9V5SA User Manual

Trane TLF1M087A9V5SA
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MO-508 ECN 5396-MA 141211
THV1M087A936, 948, 9V3, 9V5SA - Highboy
TLF1M087A936, 948, 9V3, 9V5SA- Lowboy Front Flue
TLR1M087A936, 948, 9V3, 9V5SA - Lowboy Rear Flue
TDF1M087A936, 948, 9V3, 9V5SA - Downflow/ Horizontal
OIL FIRED CENTRAL FURNACE
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
IMPORTANT — This Document is customer property and is to remain with this unit.
Please return to service information pack upon completion of work.
Installer’s Guide
THV1
Highboy
Vertical
Flue
TLF1
Lowboy
Front
Flue
TLR1
Lowboy
Rear
Flue
TDF1
Downflow/
Horizontal
Front Flue
Question and Answer IconNeed help?

Do you have a question about the Trane TLF1M087A9V5SA and is the answer not in the manual?

Trane TLF1M087A9V5SA Specifications

General IconGeneral
Model NumberTLF1M087A9V5SA
Fuel TypeNatural Gas
Input BTU87, 000
TypeGas
Blower Motor TypeVariable Speed
Warranty10-year limited

Summary

Safety Considerations and Notices

Installation Guidelines and Codes

Installation Location and Support

Installation Location

Guidance on choosing a suitable location to prevent furnace damage and ensure longevity.

Specific Installation Scenarios

Downflow/ Horizontal Furnace Setup

Instructions for setting up the furnace in horizontal configurations.

Combustion and Ventilation Air

Air for Combustion and Ventilation

Ensuring adequate airflow for combustion and ventilation is critical for furnace operation.

Chimney and Venting System

Flue/ Chimney/ Vent Connector

Guidelines for installing flue connectors, including damper restrictions and pipe material.

Chimney Condensing and Draft Control

Prevention of Chimney Condensing

Methods to prevent condensation in the chimney, which can cause damage and corrosion.

Oil Burner and Fuel System

Oil Burner and Nozzle Installation

Details on fuel requirements, burner models, and nozzle selection based on heating load.

Fuel System Installation

Guidance on oil storage tank installation, supply lines, and recommendations for filters.

Electrical Connections and Settings

Electrical Connections

Requirements for field wiring, conforming to local, state, and national codes.

Low Voltage Wiring Diagrams

Low Voltage Diagrams for PSC Motor

Wiring diagrams for single stage cooling with RH/RC circuit and 24V relay.

Variable Speed Wiring Locations

Locations for making variable speed V3, V5 low voltage wiring connections.

Variable Speed Hook Up Diagrams

Wiring diagrams for two stage and two step cooling with 24V relay.

Related product manuals