Trane TMM5B0B30M21SAA User Manual

WALL-MOUNT AIR HANDLERS
2-3TON COOLING/HEAT PUMP
TMM5B0A24M21SAA
TMM5B0B30M21SAA
TMM5B0B36M31SAA
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
Important: This Document is customer property and is to remain with this unit.
Installer’s Guide
Section 1. Features
1.1 Standard Features
1.2 Optional Accessories
•
5, 7.5 and 10 kW SINGLE PHASE ELECTRIC
HEATERS
- Circuit breakers are standard on all single
phase 5,
7.5 and 10 kW heaters.
The TMM5B series wall mount air handler is designed for installation in a closet, utility room, alcove
and can be wall mounted. These versatile units are applicable to air conditioning and heat pump
applications. Field installed electric resistance heaters are available.
• All aluminum coil.
• Blower and coil slide out easily for maintenance.
• Factory-sealed cabinet certified to achieve 2% or
less air leakage rate at 1.0 inch water column.
• Front or bottom return air.
• Painted finish on galvanized steel.
• Sturdy polycarbonate drain pans.
- Air handler has factory installed drain pans and
is shipped for upflow applications only.
• 208/230 VAC operation.
• Multi-speed direct drive blower constant torque
ECM motor with fan-off time delay programming.
• Factory installed R-410A thermal expansion
valve.
• Stud or wall mounting installation.
• Fully insulated cabinet.
• 3/4'' NPT primary and secondary drains.
• AHRI certifird and ETL listed.
18-GF13D1-1A-EN

Trane TMM5B0B30M21SAA Specifications

General

Brand	Trane
Model	TMM5B0B30M21SAA
Category	Air Conditioner
Language	English

Summary

Section 1. Features

Section 2. Safety Information

SAFETY HAZARD!

General safety advice for individuals possessing electrical and mechanical experience.

HAZARDOUS VOLTAGE!

Warning about disconnecting all electrical power before installation or servicing.

LIVE ELECTRICAL COMPONENTS!

Precautionary advice for working with live electrical components during operation.

EXPLOSION HAZARD!

Caution against storing flammable materials, gasoline, or liquids near the unit.

ELECTRICAL HAZARD!

Emphasizes the requirement for proper electrical grounding according to codes.

HAZARDOUS VAPORS!

Warning about installing near fossil fuel devices to prevent vapor distribution.

Section 3. Installation Instructions

3.2 Location

3.2.1 WALL MOUNT

Details on mounting the air handler using wall brackets and ensuring structural support.

3.2.2 FRAME MOUNT

3.3 Duct Work

WARNING

Caution against connecting return ductwork to other heat-producing devices.

3.4 Condensate Drain

3.5 Refrigerant Piping

3.8 Wiring

WARNING

Warning about disconnecting all power before installing or servicing.

3.8.1 POWER WIRING

3.8.2 CONTROL WIRING

3.8.3 GROUNDING

Warning emphasizing the need for permanent grounding to prevent electrical shock.

3.11 Sequence of Operation

3.12 Operational And Checkout Procedures

4. Verify that all electrical connections are tight.

8. Operate complete system in each mode to verify proper performance.

Section 4. Wiring

Section 6. Performance and Electrical Data (WALL-MOUNT AIR HANDLERS ARE SUITABLE FOR MOBILE HOME APPLICATIONS)

Airflow Performance(Standard CFM)

Section 7 Dimensional Data

7.1 UNIT DIMENSIONS