10
USER GUIDE
18-HD46D1-1
Menu Item: Thermostat
Setting Range Description
Temperature Scale [Fahrenheit], Celsius Select the temperature display scale
Fan Circulate On Time 10 - 55 minutes, [10] Select the desired amount of time the fan will cycle per hour when the
Fan Mode selected is Circ
Local Schedule Enable [Yes], No Select whether scheduling will be enabled or disabled. Note: Selecting
No will hide the Schedule menu.
Max Heat Setpoint 55 - [90] Degrees Select the highest heating setpoint allowed
Min Cooling Setpoint [60] - 99 Degrees Select the lowest cooling setpoint allowed
H/C Delta [3] - 15 Degrees Select the minimum distance between Heating and Cooling setpoints
When all selections have been made, press the Done button to register your changes and exit this menu item. Press Next to navigate to
the next menu item.
Menu Item: Energy Save Mode
Setting Range Description
ESM Heat Setpoint 55 - 90 degrees [62] Select the desired Heating Setpoint when ESM (Energy Savings Mode)
is selected
ESM Cooling Setpoint 60 - 99 Degrees [85] Select the desired Cooling Setpoint when ESM (Energy Savings Mode)
is selected
When all selections have been made, press the Done button to register your changes and exit this menu item. Press Next or Back to
navigate to the next or previous menu item.
Menu Item: Display
Setting Range Description
Screen Timeout [0] - 90 Seconds Select how long after the last button press before the screen times out
Backlight Timeout 0 - 90 Seconds [20] Select how long after the last button press before the backlight dims
Backlight On Percent 0 - [100] Percent Select the screen brightness when the backlight is lit
Backlight Off Percent [0] - 100 Percent Select the screen brightness when the backlight dims
Buzzer Enable [Yes], No Select whether button presses are audible
Security [Unlocked], Display Lock, Guest
Access
Select security level
• Unlocked - Enables selection of all menus and settings
• Display Lock - Disables selection of all menus and settings
• Guest Access - Disables selection of all menus and settings except the
following: Raise or lower heating or cooling setpoint +/- 5 degrees and
change system mode
Note: When Display Lock or Guest Lock is selected a lock icon will
appear next to the up arrow.
Note: To disable Display Lock or Guest Access, press and hold the up
and down arrows until the lock icon disappears.
Guest Mode Range [5 degrees], 1-5 degrees How many degrees (+/-) Guests can change the preset Set Point
When all selections have been made, press the Done button to register your changes and exit this menu item. Press Next or Back to
navigate to the next or previous menu item.
User Settings allow the user to customize various settings on the 524 Control. To access User Settings simply press Menu and SELECT.
Use the NEXT and BACK buttons to navigate through the options. Use the SELECT button to enter change mode. After making your
changes, use the DONE button to register your changes. The various options are shown in the following tables, and the default setting is
shown in brackets.
User Settings
To Next Page
Loading...
