To Next PageTo Next Page
Need help?Do you have a question about the Trane *UH2B060A9V3VA and is the answer not in the manual?
Warning about carbon monoxide poisoning from improper venting.
Warning about fire or explosion risks from improper installation or servicing.
Warning regarding the use of open flames for leak testing.
Information intended for individuals with adequate electrical and mechanical experience.
Caution regarding sharp edges during installation or servicing.
General guidelines and responsibilities for equipment installation.
Requirements for furnace placement and surrounding space clearances.
Procedures for installing the furnace in an upflow configuration.
Procedures for installing the furnace in a downflow configuration.
Procedures for installing the furnace in a horizontal configuration.
Requirements for providing adequate air for furnace combustion and ventilation.
Guidelines and considerations for connecting supply and return air ducts.
Information on installing and maintaining return air filters for the furnace.
Instructions and safety precautions for furnace venting systems.
Specific instructions and considerations for venting the furnace horizontally.
Guidelines for routing furnace vent terminals through exterior walls.
Instructions for routing furnace vent pipes through the roof.
Details on materials and installation for stainless steel vent fittings.
Instructions and guidelines for downward furnace venting configurations.
Procedures for installing and maintaining furnace condensate drainage systems.
Specific condensate drain installation for vertical furnace applications.
Specific condensate drain installation for horizontal furnace applications.
Guidelines and safety precautions for connecting the gas supply.
Procedures for verifying furnace combustion and input rates.
Steps for adjusting the furnace gas valve manifold pressure settings.
Instructions for adjusting furnace operation at high altitudes.
Guidelines for making electrical connections to the furnace unit.
Diagrams showing thermostat and furnace wiring connections.
Essential checks to perform before initial furnace start-up.
Procedures for safely lighting the furnace burners during initial start-up.
Adjusting safety devices and control system settings for proper operation.
Description of furnace operation during various heating cycle stages.
Settings for the indoor blower's on and off delay periods.
Procedures for adjusting furnace airflow settings for optimal performance.
Information on the manual reset temperature limit on the burner box.
Factors that can impact furnace system operation and performance.
Guidance on the maintenance of indoor blower motors.
Interpreting red LED flashes for error identification and diagnostics.
Understanding the green LED indicator for system status and normal operation.
Procedures for recovering from and resetting furnace fault codes.
General