To Next PageTo Next Page
Need help?Do you have a question about the Trane Voyager THD150G and is the answer not in the manual?
General| Brand | Trane |
|---|---|
| Model | Voyager THD150G |
| Category | Air Conditioner |
| Language | English |
Hazards and requirements for field wiring and grounding.
Guidelines for unit inspection upon arrival and storage.
Warnings about fiberglass wool and importance of unit clearances.
Safe rigging procedures, including warnings for heavy objects and improper lifts.
Foundation, roof support, water damage, and ductwork installation guidelines.
Checklist for successful commercial unit installation, including wiring safety.
Guidelines for field installed power wiring, emphasizing copper conductors.
Standard, optional TBUE wiring, and control wiring.
Use of control power transformer and field installed control wiring.
Warnings about hazardous voltage, voltage imbalance, and electrical phasing.
Safety during live component work and compressor crankcase heater function.
Installation of factory-mounted circuit breakers and disconnects, including capacitor safety.
Field wiring for power entrance and control wiring routing.
Steps for installing the return air smoke detector assembly.
Describes three test modes for component checks.
Procedures for verifying airflow and using ReliaTel controls for testing.
Steps for starting up the economizer and compressors.
Procedures for heating start-up and VAV system operation.
Final checks before leaving the unit after startup.
Procedure for adjusting fan belt tension and measurement ranges.
Safety warnings and steps for ReliaTel control diagnostics.
Methods for checking system status using LED indicators.
