Need help?Do you have a question about the Trane Voyager TSD/TSH 060 and is the answer not in the manual?
General| Brand | Trane |
|---|---|
| Model | Voyager TSD/TSH 060 |
| Category | Air Conditioner |
| Language | English |
Instructions for installation, start-up, operation, and maintenance of Trane units.
Safety information and hazard warnings for proper operation and servicing.
Procedures for inspecting units upon arrival for damage.
Conditions and factors that void the manufacturer's warranty.
Benefits of signing a maintenance contract for regular servicing.
Procedures for receiving and handling rooftop units.
Instructions for handling the unit safely.
Information about roof curbs for unit installation.
Structural support requirements and space needed for the unit.
Procedures for installing the unit, including discharge conversion.
Instructions for securely mounting the unit on a roof curb.
Procedures for installing the unit on a stable ground support.
Guidelines for connecting ductwork to the unit.
Procedures for condensate drain connection.
Requirements and procedures for gas supply pipework installation.
Instructions for installing filters into the unit.
Procedures for determining and adjusting the supply fan speed.
Procedures for connecting the unit's electrical components.
Wiring details for the unit's 24V AC control circuit.
Installation, specifications, and wiring for CO2 sensors.
Installation procedures and types of fire thermostats.
Overview of available thermostat models and their features.
Description of TRANE and LON communication interface boards.
Information and installation of hot water coils.
Description and features of electric heaters and overheat thermostats.
Function and adjustment of the soft starter for supply fans.
Manual fresh air intake option with adjustable damper.
Function of the barometric relief system to minimize overpressure.
Unit operation modes when controlled by a conventional thermostat.
Unit control strategies for unoccupied periods.
How the unit operates during cooling and economizer modes.
Procedures for testing unit components and operation.
Steps for verifying gas valve settings and starting the unit.
Step-by-step guide to starting the unit in cooling mode.
Unit operation when the economizer is not used.
Unit operational behavior in low ambient temperature conditions.
Adjusting the economizer minimum position and air settings.
Operation, self-checks, and lockout procedures for the ignition module.
Periodic maintenance tasks for end users, like filter replacement.
Pre-season checks for cooling and heating seasons by technicians.
Unit diagnostics, system status checks, and failure indications.
Troubleshooting steps for system failures based on voltage checks.
Diagnosing heating failures using ignition module LED indicators.
Troubleshooting procedures for cooling failures.
To Next Page