To Next PageTo Next Page
Need help?Do you have a question about the Trane Voyager WS 150-24 and is the answer not in the manual?
General| Model | Voyager WS 150-24 |
|---|---|
| Category | Air Conditioner |
| Phase | 3 |
| Frequency | 60 Hz |
| Compressor Type | Scroll |
| Refrigerant | R-410A |
| Cooling Capacity | 150 tons |
| Voltage | 460V |
| Heating Capacity | Varies with heating option (Gas, Electric, Hot Water) |
Discusses safety gear needed for installation and servicing, including specific types and guidelines.
Emphasizes the need for qualified personnel for field wiring and grounding to prevent fire and electrocution hazards.
Details steps for checking the unit upon arrival, including verifying nameplate data and inspecting for shipping damage.
Explains minimum operating and service clearances for installation to ensure proper operation and accessibility.
Provides instructions and safety warnings for lifting the unit, including rigging points and load balancing.
Details power supply verification, wiring, grounding, and control wiring standards for safe installation.
Covers standard, optional, and field-installed power wiring, control wiring, and transformers.
Guides on checking RTRM status, LED indicators, and performing system status checkout procedures.
Details methods for checking unit status via LED indicators or voltage readings at RTRM terminals.
Lists common failure causes and provides methods to reset cooling and heating lockouts.
Explains ZTS indicators, clogged filter/fan failure/overflow switches, and ZTS testing procedures.
Covers testing programmable/digital zone sensors, serial communication voltage, and temporary operation without a zone sensor.
