Installation
RT-SVX33E-EN 23
Space Temperature Averaging
Space temperature averaging is accomplished by wiring a
number of remote sensors in a series/parallel circuit.
Using the BAYSENS016* or BAYSENS075*, at least four
sensors are required to accomplish space temperature
averaging. Example #1 illustrates two series circuits with
two sensors in each circuit wired in parallel. The square of
any number of remote sensors is required. Example #2
illustrates three sensors squared in a series/parallel circuit.
Using BAYSENS075*, two sensors are required to
accomplish space temperature averaging. Example #3
illustrates the circuit required for this senor. Table 6, p. 24
lists the temperature versus resistance coefficient for all
sensing.
Figure 19. Space temperature averaging examples
To Next Page
Loading...
