To Next PageTo Next Page
Need help?Do you have a question about the Trane YSC060ED and is the answer not in the manual?
General| Energy Efficiency Ratio (EER) | 11.0 |
|---|---|
| HSPF | Not applicable |
| Refrigerant Type | R-410A |
| Compressor Type | Scroll |
| Voltage | 208/230V |
| Phase | 3 |
| Cooling Capacity | 60, 000 BTU/h |
Covers receiving, handling, and storing the unit to prevent damage and ensure proper operation.
Details on unit nameplates, model numbers, and general unit characteristics.
Introduction to the unit's control systems, including ReliaTel™ and optional components.
Describes the RTRM, RTCI, and other modules for system control and communication.
Explains sensors, switches, and inputs used by the control system for monitoring and operation.
Details various zone sensors, remote sensors, and optional control modules.
Provides essential dimensions for unit placement, roof openings, and installation clearances.
Steps and safety precautions before installing the unit, including fiberglass handling.
Guidance on constructing foundations and safely rigging the unit for placement.
Instructions for connecting ductwork and installing roof curbs for proper unit mounting.
Procedures for converting discharge configuration and replacing TCO-1 limit controls.
Instructions for safe and compliant field installation of power and control wiring.
Details on connecting zone sensors, digital inputs/outputs, and low voltage wiring.
Essential checks and safety warnings before initial unit start-up.
Procedures for verifying correct voltage supply and electrical phasing for motor protection.
Guidelines for operating crankcase heaters to protect compressors during off-cycles.
Steps to verify ReliaTel control system functionality before starting the unit.
Explanation of different test modes for component operation verification.
Procedures for measuring and ensuring correct airflow for optimal unit performance.
Steps to properly start and configure the economizer control system.
Detailed steps for safely starting compressors and verifying their operation.
Final checks after start-up, including programming and securing unit components.
Instructions for adjusting, inspecting, and replacing fan belts for proper unit operation.
Routine checks and cleaning to be performed monthly for unit upkeep.
Maintenance steps for the condensate overflow switch and cleaning refrigerant coils.
Procedures for maintaining hail guards and performing annual unit inspections.
Guidelines for recording unit data and completing final maintenance steps.
How to use the RTRM for system diagnostics and status information.
Methods to check system status indicators and identify operational issues.
Explanation of LED indicators for failures and procedures for resetting lockouts.
Guidance on testing zone sensors and troubleshooting economizer control issues.
Provides a reference for locating specific unit wiring diagrams.
Details the warranty coverage, limitations, and claims process for the unit.
