To Next PageTo Next Page
Need help?Do you have a question about the Trane YSC072H and is the answer not in the manual?
General| Model | YSC072H |
|---|---|
| Refrigerant Type | R-410A |
| Compressor Type | Scroll |
| Voltage | 208/230V |
| Phase | 3 |
| HSPF | Not Applicable |
Defines advisory types: WARNING, CAUTION, and NOTICE for hazard communication.
Covers critical safety warnings for field wiring, PPE, and EHS policies.
Details on interpreting digits for Unit Type, Efficiency, Airflow, Controls, and Heating.
Explains Low Pressure Control, High Pressure Control, and Compressor Disable functions.
Details PPE, first aid, and precautionary measures for fiberglass exposure.
Addresses hazards of heavy objects and improper lifting techniques.
Safety guidelines for maintaining clearances from heat sources.
Specific instructions for lifting the unit using fork pockets.
Steps for converting airflow direction from downflow to horizontal.
Safety procedures and considerations for rigging and lifting the unit.
Steps for converting airflow direction for larger capacity units.
Covers electrical wiring, grounding, capacitor safety, and conductor types.
Details on connecting the gas supply line through the unit base.
Covers gas train pressure, piping requirements, and leak checking.
Covers wiring safety, grounding, and conductor types for field wiring.
Covers control wiring safety, grounding, and conductor guidelines.
Critical checks for three-phase power quality and motor phasing.
Details different test modes, their sequences, and resistance values.
Outlines tests for fan, economizer, and cooling functions.
Details cooling operation without economizer and three-stage cooling.
Explains how the economizer is utilized for cooling and temperature control.
Procedures for checking and adjusting supply and return air flow.
Steps for starting compressors and checking rotation and pressures.
Details cooling operation for electromechanical systems without an economizer.
Steps for setting up the economizer, including minimum position settings.
General safety warnings for performing maintenance tasks.
Detailed cleaning methods for microchannel and RTPF coils with safety warnings.
Checking RTRM status, LED indicators, and system failures.
Procedures for resetting cooling failures and ignition lockouts via space or unit.
Details warranty coverage for parts, compressors, and heat exchangers.
