BASIC
PROCEDURES:
T
EMPERATURE
•To check the outdoor temperature,
press OUTDOOR TEMP. The outdoor
temperature ranges from -20° F to
120° F. (Note: If the outdoor sensor is
not installed, the outdoor tempera-
ture displayed on the thermostat will
be -13° F or below) Press OUTDOOR
TEMP again or EXIT to return to the
normal LCD display. Or wait a minute,
and the normal LCD display will return
on its own.
•Setpoints are the heating and cooling
temperatures you prefer. Press either
ARROW once to see the setpoint of
the current mode (cooling or heating).
They are displayed by the set of flash-
ing numbers on the left, next to the
words Set Pt. The actual indoor tem-
perature is indicated on the right.
Press the HEAT/COOL button to toggle
between heating and cooling setpoints.
Press EXIT when you’ve seen enough.
A Matter Of Degrees.
8
To Next Page
Loading...
