CHANGING
SETPOINTS
Maybe you wish the temperature were dif-
ferent. Here’s how to change the setpoints from
the factory settings.
•Press either ARROW, and you’ll see
the current setpoint on the left side of
the LCD (next to Set Pt.).
•Toggles display from heating to cool-
ing back to heating setpoints.
The current indoor temperature is
to the right.
•Press the appropriate ARROW
to change the setpoint temperature of
the required mode (Heating or
Cooling).
•Press EXIT once you have reached
your setpoint and wish to return to the
LCD’s normal display.
Note: The Cooling setpoint will always be at
least four degrees higher than the Heating set-
point. If one setpoint infringes on the required
four-degree separation, the Home Comfort Sensor
will automatically adjust the other to maintain the
difference.
Change Can Do A Body Good.
9
To Next Page
Loading...
