SYSTEM
SET-UP
Let’s say you prefer military time on your LCD
clock. Or you’d rather see the temperature in Cel-
sius degrees. Or you think the temperature read-
ing needs adjusting. Or you just feel like going
beyond the basics.
•While holding down EXIT, press OUT-
DOOR TEMP. Hold both keys simulta-
neously until System Set-Up appears
in the upper left corner of the LCD.
(This will take approximately three
seconds.)
Now the Home Comfort Sensor will begin to
talk to you. Watch for messages where the clock
is normally displayed.
•The first Set-Up, indoor temperature
calibration, is best left to professionals.
But if
you
and your independent ther-
mometer say the Home Comfort Sensor
is off and you really want to change it
yourself, use the ARROW keys to
change the calibration of the indoor
temperature sensor. You’re in this mode
when the letters CAL appear.
Getting Really Fancy.
10
To Next Page
Loading...
