SRT Marine
Instruction Manual
SRT-MTB
©
Class B Marine AIS
Programming the transponder
Programming software
Before the TRANSAS AIS CLASS B can be used it requires ‘personalisation’.
This is done via the TRANSAS AIS CLASS B proAIS package which is supplied as an accessory. The proAIS user guide
contains more detail on configuration of the transponder.
This software is designed to be installed on a PC and to use the data lead provided as standard with the TRANSAS AIS CLASS
B unit. If the PC being used for programming does not have a 9-pin serial port then a commercially available USB to serial
adaptor may be required. This connects between the supplied data lead and the PC.
Configuration
The TRANSAS AIS CLASS B personalisation data required is the ship’s MMSI, the ship’s name, its dimensions, position
reference, type and call sign. Please refer to the proAIS user guide for more information on configuration and installation
diagnostics.
To Next Page
Loading...