SRT Marine
Instruction Manual
SRT-MTB
©
Class B Marine AIS
Status
This is a blue LED which either indicates that a Safety Related Message has been transmitted or that the unit is in "Silent
mode". The condition indicated by the blue LED is determined during configuration of the unit by the switch option selected.
Please refer to the "Switch functions" section of this manual for more detail.
•
Transmission of a Safety Related Message is indicated by both the green and blue LEDs being illuminated
TIMEOUT ERROR STATUSPOWER
•
Silent mode is indicated by both the yellow and blue LEDs being illuminated.
TIMEOUT ERROR
STATUSPOWER
Antennas
The TRANSAS AIS CLASS B - unit requires VHF and GPS antennae independent from those in use for other purposes. Please
see Appendix A for details of the antennae required.
Maintenance
WARNING:
Unauthorised opening of the TRANSAS AIS CLASS B system will invalidate the warranty.
CAUTION:
Avoid using chemical solvents to clean the TRANSAS AIS CLASS B as some solvents can damage the case
material.
NOTE:
The TRANSAS AIS CLASS B contains no user serviceable parts. Contact your Service Agent for repair if
replacing the fuse fails to make the equipment serviceable.
To Next Page
Loading...