Transcend DrivePro 10 - Dashcam Function Buttons; LED Indicator Status Guide

8
3-4 Function Buttons
Mode
Emergency Recording / Reset Button
Emergency
Recording
 Short press the red button to manually activate
Emergency Recording.
Restore to Default
 Long press the red button for 10 seconds to reset
device settings to default and format the memory
card.
Notice: Formatting will permanently erase all data.
Mode
Reset Pinhole
Restart Device
 Insert a paperclip in the battery reset pinhole. Hold
for a few seconds. The device will power off and
restart.
Notice: Restarting the device will not clear any
existing data, but your last recording may fail to be
saved.