3-3 Mounting the DrivePro
1. Insert the mount bracket into the top of the DrivePro, and slide sideways until you hear a click.
2. Thoroughly clean and dry the area of the windshield you wish to mount the DrivePro. If
possible, mount the DrivePro in the middle of the windshield near the rear-view mirror for the
best field of view.
3. Peel off the protective film from the mount bracket’s foam sticker, and firmly attach the
DrivePro to the windshield.
4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro’s position.
5. After the DrivePro is in the best position, turn the adjustment knob clockwise to make sure
that the DrivePro is securely locked in place.
To Next Page
Loading...
