Transcend DrivePro 220 - DrivePro Firmware Upgrade; Restore DrivePro Defaults

21
2. Insert the microSD memory card that contains the latest firmware version.
3. Select Firmware Upgrade from the Settings menu, and press to start the firmware
detection process. The DrivePro will automatically find the latest firmware file.
WARNING: NEVER remove the power cord or the microSD memory card while the
firmware is being upgraded.
If the DrivePro cannot be turned on due to firmware upgrade failure, please contact Transcend
customer service for technical support.
Restore Defaults: Reset all settings to factory default settings.
Available options: No / Yes