Transcend DrivePro 520 - LED Indicator Status Guide; Setting Date, Time, and Time Zone

12
LED Indicator Reference Chart
LED Wi-Fi Status Definition
● On
Flashing Recording with Wi-Fi
Solid Standby with Wi-Fi
● Off
Flashing Recording
Solid Standby
Setting the Date, Time and Time Zone
 To set the current date and time:
1. During video recording, press the Settings button .
2. Use / to select Date/Time Settings, and press .
3. Use / to adjust values, and press to move to the next block.
4. Repeat Step 3 to set up the date/time format and time zone. Press after finishing the
settings.