Transcend DrivePro 520 - Mounting the DrivePro on Windshield

9
Mounting the DrivePro
1. Insert the mount bracket into the top of the DrivePro, and slide sideways until you hear a click.
2. Thoroughly clean and dry the area of the windshield you wish to mount the DrivePro. If possible,
mount the DrivePro in the middle of the windshield near the rear-view mirror for the best field of
view.
3. Press down the lever bar of the suction mount or peel off the protective film from the adhesive
mount, and firmly attach the DrivePro to the windshield.
4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro’s position.