Transcend DrivePro 550B - Page 19

18
Auto Display
Off
Set duration for the display to automatically turn off after a
recording begins.
Note: Auto Display Off is disabled when Speed Alarm, Forward
Collision, Lane Departure, Headlight Reminder, Driver Fatigue
Alert, or Head-Up Display is enabled.
Never (default) / After 1 min / After 3 mins
GPS Status
Display the number of GPS satellites received and GPS signal
intensity.
Navigation
System
Select a navigation system according to your preference.
GPS (default) / GLONASS
Wi-Fi
Turn on/off Wi-Fi
Off / On (default)
Date/Time
Set the current date, time, format and time zone.
Language
Set the on-screen display menu language
English / 繁體中文 / 简体中文 / 日本語 / Deutsch / Español /
Français / Italiano / Русский / Português / Ελληνικά / / Türkçe /
한국어 / ไทย
Format Card
Format the microSD memory card.
WARNING: Formatting will erase all the data stored in the
card.
Cancel (default) / Confirm
Upgrade
Firmware
Keep your DrivePro up-to-date with the latest version downloaded
from the Transcend website
https://www.transcend-info.com/Support/service.
Cancel (default) / Confirm
Restore
Defaults
Reset all the settings to factory default settings.
Cancel (default) / Confirm
Screen
Adjustment
Adjust the position of the recording screen
Information
Display the DrivePro’s current firmware version, card capacity,
Wi-Fi SSID and password, model name/number.
6-2 Upgrade Firmware
1. After downloading the firmware from Transcend website, decompress it and put it in the
“SYSTEM” folder in the microSD memory card.