Transduction TR-LCD1900-RM User Manual

Safety Precaution
When not used for extended periods of time, set your PC to DPMS. If using a
screen saver, set it to the active screen mode.
Do not use a damaged or loose plug. This may cause an electric shock or fire.
Do not pull the plug out by the wire or touch the plug with wet hands. This may
cause an electric shock or fire.
Use only a properly grounded plug or receptacle. An improper ground may
cause electric shock or equipment damage.
Do not excessively bend the plug and wire or place heavy objects on them. This
could cause damage and an electric shock or fire.
Do not place the monitor face down. The LCD surface may be damaged.
When cleaning, wipe with a slightly moistened, soft cloth. Do not spray any
cleaner directly on to the monitor.
Do not remove housing. No serviceable parts inside. Refer servicing to
Transduction.
Page 2 of 37
TR-LCD1900-V2 User Manual

Transduction TR-LCD1900-RM Specifications

General

Brand	Transduction
Model	TR-LCD1900-RM
Category	Monitor
Language	English