Need help?Do you have a question about the trapKAT 4 and is the answer not in the manual?
Specific setup instructions for models without the internal sound card.
Explains the function and operation of the power switch.
Describes the power adapter connection and specifications.
Details the connection for bass drum triggers.
Covers the types of footswitches supported and their usage.
Explains how to navigate and select kits using the footswitch.
Describes the footswitch for editing note parameters.
Explains the function and use of the MIDI OUT ports.
Identifies and numbers all the pads on the trapKAT controller.
Step-by-step guide for setting up and troubleshooting the HiHAT.
Step-by-step guide for setting up and troubleshooting the bass drum pedal.
Explains how to set the MIDI channel for kits and individual pads.
Details settings for minimum/maximum velocity and velocity curves for kits.
Explains how to select and use different foot control curves.
Describes special curve functions for multi-pad and alternate modes.
Details how to use alternate modes for rhythmic patterns and sequences.
Explains sending continuous control data and layering MIDI notes.
Covers various methods and settings for HiHAT control.
How to assign pads to function as HiHAT pads.
How to define MIDI note numbers for HiHAT states.
Explains using continuous controller data for varied HiHAT sounds.
Details the HATNOTE mode and its overlap feature.
Instructions for copying kits between User Kit locations.
How to control volume, bank, and program changes for sounds.
Explains controlling individual drum volumes, reverb, and EFX for the Kurzweil sound engine.
Guides on assigning custom names to User Kits.
How to send an "All Notes Off" command to silence all current notes.
Explains Gate Time settings for sound length and includes special modes.
Describes the Roll Mode for delaying note-offs.
Explains the Infinite Mode for continuous note-on events.
Describes the Latch Mode for toggling note on/off with repeated hits.
Accessing hidden functions like HiHAT Train Results.
Displays results of HiHAT pedal training and allows tweaking.
Shows idle sensor levels for all pads.
Emphasizes the importance of saving User Kits manually.
Explains the two banks of kits and their intended use.
Details how to enable and use the built-in grooves.
Explains how to protect kits from accidental changes or saves.
Describes the MIDI Merge function for routing MIDI data.
Controls the "ease" or timing of the HiHAT splash sound.
Allows the trapKAT to receive program changes from external devices.
Enables cymbal choking sounds controlled by pad grab or note numbers.
Adjusts the overall volume level for the grooves.
Details how to perform data dumps for backing up settings.
Guides on training pads for personal playing dynamics and sensitivity.
Sets the low-end sensitivity for pad triggering to avoid false hits.
Adjusts the dynamic range mapping for soft and hard hits on pads.
Restores the trapKAT to its original factory settings.
Option to display General MIDI names for sounds.
Specific instructions for training the HiHAT pedal.
Adjusts gain for bass drum triggers for optimal response.
Adjusts display angle and toggles the beeper sound on/off.
Instructions for saving current User Kit configurations.
Explains how to link pads so striking one plays multiple sounds.
Defines technical terms used throughout the manual.
Discusses special MIDI considerations for percussion and drum sounds.
Step-by-step guide for physically changing the software chip.
Outlines the warranty terms and conditions for the trapKAT.
Lists conditions that void the warranty.
Provides instructions for cleaning and maintaining the trapKAT.
Contact information and procedures for customer service.
Details the process for returning the unit for repair or updates.
To Next Page
General