KIT EDIT FUNCTIONS
The following section will go over all of the KIT Edit Functions that are in the trapKAT. It is in these
screens that all of the programming of the kits happen. Accessing these functions are always the same.
Step on the KIT EDIT Footswitch, and while held down, tap on one of the pads. The pads function will
display. Here is the list of functions.
Pad 1 Kit MIDI Channel
Pad 2 Kit Minimum Velocity
Pad 3 Kit Maximum Velocity
Pad 4 Kit Velocity Curve
Pad 5 Kit HiHAT Selectable
Pad 6 Kit Splash Note
Pad 7 Kurzweil Sound Control Listing
Pad 8 Kurzweil Sound Control Value Change
Pad 9 HiHAT Overlap
Pad 10 Kit Gate Time
Pad 11 Pad MIDI Channel
Pad 12 Pad Minimum Velocity
Pad 13 Pad Maximum Velocity
Pad 14 Pad Velocity Curve
Pad 15 Kit Copy “to” Kit
Pad 16 Perform Kit Copy
Pad 17 Foot Control Channel
Pad 18 HiHAT Continuous Control
Pad 19 Volume, Bank, Program Change Listings
Pad 20 Volume, Bank Program Change Value Change
Pad 21 Kit Name
Pad 22 All Notes Off
Pad 23 No Function/HiHAT Train Values/Pad Threshold Values
Pad 24 Pad Gate Time
In an attempt to make these functions more understandable, we have combined the pad functions into
categories. This should make it easier to program the trapKAT as related functions described below
have been organized in one topic.
MIDI CHANNEL
Pad #1 and Pad #11
To change the MIDI Channel on the entire User Kit, tap on pad #1. The Kit's current MIDI channel is
displayed. To change the MIDI channel, tap on the pad again or “quick click” to reverse direction when
tapping on the pad.
21
To Next Page
Loading...