Traynor Small Block 106 - Specifications - English; Français

6
Spécifications
Modèle
SB200H/SB106
Type:
am
p
lificateur
p
our basse / SB106 am
p
li basse et coffret com
p
act
Impédance d'Enceinte (ohms):
SB200H: 4 ohms
SB106: 8 ohms
(
interne
)
4 ohms
(
externe
)
Puissance @ min. impédance (watts):
200 watts
Impédance Minimum (ohms):
4 ohms
Puissance de Pointe - 2 cycles:
250 watts
Configuration de Haut-Parleur - FG (Dimensions / Puissance):
SB106: 6.5 / 150W
(
interne
)
Canaux d'entrée:
2
Canal 1 - entrées:
p
assive 0 dB, active -6 dB
Canal 1 - contrôles:
Gain, Bass, Low Mid, Hi
g
h Mid, Treble, Low Ex
p
ander
Canal 1 - sélecteurs:
Mute, Ground Lift, Line Out Pré/Post EQ
Canal 2 - entrées:
Entrée Aux - 1/8 de
p
ouce
Sortie Ligne (type / configuration):
S
y
métri
q
ue commutable Pré-EQ/Post-EQ, Sélecteur Ground Lift
Sortie Ligne Sensibilitée (Vrms):
1 Vrms
DEL indicatrices:
rou
g
e, bleue,
p
rotect, alimentation
Protection:
cli
p
,thermi
q
ue,sruchar
g
e.
Haut-parleur externe - sortie/emplacement:
Combi-Jack
(
1/4-inch/S
p
eakon™
)
/ arrière de l'a
pp
areil
Autres Caractéristiques:
Prise 1/4 de
p
ouce
p
our cas
q
ue, Sortie
p
our Accordeur
Dimensions (PLH, pouces):
SB200H: 7.5 x 8 x 1.75
SB106: 9 x 9.5 x 12.5
Dimensions (PLH, cm):
SB200H: 19.1 x 20.35 x 4.5
SB106: 22.9 x 24.2 x 11.5
Poids (livres / kg):
SB200H: 2.375/1.1
SB106: 15/6.8
Spécifications sujettes à changement sans préavis
Specifications
Model:
SB200H/SB106
Type:
SBH200H bass am
p
/ SB106 bass am
p
& com
p
act cabinet
Cabinet Impedance (ohms):
SB200H: 4 ohms
SB106: 8 ohms
(
internal
)
4 ohms
(
external
)
Power @ min. impedance (watts):
200 watts
Minimum Impedance (ohms):
4 ohms
Burst Power - 2 cycle:
250 watts
Speaker Configuration - LF (Size / Power):
SB106: 6.5 / 150W
(
internal
)
Input Channels:
2
Channel 1 - inputs:
p
assive 0 dB, active -6 dB
Channel 1 - controls:
Gain, Bass, Low Mid, Hi
g
h Mid, Treble, Low Ex
p
ander
Channel 1 - switches:
Mute, Ground Lift, Line Out Pre/Post EQ
Channel 2 - inputs:
Aux In - 1/8-inch
Line Out (type / configuration):
Balanced Switchable Pre-EQ/Post-EQ, Ground Lift switch
Line Out Sensitivity (Vrms):
1 Vrms
LED Indicators:
red,blue
p
rotect & standb
y
,
p
ower
Protection:
cli
p
,thermal, overcurrent.
External speaker output / location:
Combi-Jack
(
1/4-inch/S
p
eakon™
)
/ rear of unit
Other Features:
1/4-inch head
p
hone
j
ack, Tuner out
Dimensions (DWH, inches):
7.5 x 8 x 1.75
SB106: 9 x 9.5 x 12.5
Dimensions (DWH, cm):
SB200H: 19.1 x 20.35 x 4.5
SB106: 22.9 x 24.2 x 11.5
Weight (lbs / kg):
SB200H: 2.375/1.1
SB106: 15/6.8
Specifications subject to change without notice
Specications - English / Français