Do you have a question about the Treadly TR-200B and is the answer not in the manual?
Read all safety information before use. Owner ensures users are aware of warnings and precautions.
Consult a physician before starting fitness plans. Incorrect training can cause serious injury.
Stop exercising immediately if experiencing faintness, chest pain, or shortness of breath and consult a physician.
Children under 14 and persons with reduced capabilities must not use. Keep children/animals away.
Use specified voltage power supply and ensure the power socket remains grounded.
Not suitable for individuals with doctor's advice against exercise or certain cardiac medical devices.
WARNING! Excessive exercise can cause serious injury or death. Stop if dizzy.
Avoid extreme temperatures, liquids, loose clothing, and foreign objects in belt gap. Do not touch cord with wet hands.
Press emergency stop button in emergencies. Hold handrail if unfolded and straddle side strips.
Do not place outdoors, near water, heaters, stoves, or direct sunlight.
Read instructions. Treadly not liable for injury/damage from improper use. Consult doctor. Indoor use only.
Contact support for assistance: 877-273-2701, contact@treadly.co, www.treadly.co.
For safety, please wear sports shoes. Do not tread on the specified part.
Place box on a flat, stable surface. Never unpack from sides. Ensure top cover faces up.
Place Treadly on flat surface. Maintain 1.6' clearance on sides/front and 6.5' behind.
Unplug power cord and ensure handrail lock is in the LOCK position before moving.
Connect to a grounded outlet. Use specified voltage. Never touch cord/switch with wet hands.
Do not cover motor cover, step on it, or jump. Side strips aid safe straddling during start-up/emergencies.
Press large red button in handrail middle to halt unit in emergency. Restart via latch and START button.
Accelerate slowly, hold handrail with one hand. Use Emergency Stop button if needed.
Press Stop button or Emergency Stop Switch to halt unit during automatic operation.
Turn off/unplug Treadly. Tilt unit, pour silicone oil on board, let it flow, then repeat.