What to do if Treadly TR100 Treadmill displays an E2 error?
If your Treadly Treadmill display shows an E2 error message, it indicates that the treadmill is overheated due to a large buildup of friction. To resolve this, stop using the treadmill for 30 to 60 minutes to allow it to cool down. Also, lubricate the running surface.
What to do if Treadly TR100 displays an E5 error message?
If the Treadly Treadmill display shows an E5 error message, it means that the running surface has significantly shifted to the left or right. You will need to adjust the running surface to correct this.
Why did my Treadly TR100 Treadmill shut down after being inactive?
If your Treadly Treadmill has shutdown unexpectedly after inactivity, it is because when the treadmill is in Standby mode for more than 10 minutes, the treadmill will completely shut down the power. Restart the treadmill by stepping in each area of the running surface to get the running surface moving.
Guides on centering and tensioning the treadmill's running belt for optimal performance.
Instructions for applying silicone lubricant to reduce friction and prolong treadmill life.
To Next Page
General
