Treadly TR100 treadmill contact@treadly.co page 4
Unpacking'you r'Treadly'TR100'treadmill'
When you unpack your Treadly TR100, it should contain the following:
• The Treadly TR100 - pre-assembled with 110v power cord *
• 2 – Metal wall fasteners
• 2 – Bottles of silicon lube
• 1 – Hex (Allen) Key
• User Manual
• Packaging Box
Warning: Please read all instructions before using the treadmill.
* Some models of Treadly TR100 come without handrails pre-assembled.
Before'you'begin'
Before using Treadly TR100, please carefully read and follow all
instructions as directed.
• After unpacking, please make sure that there are no visible
damages to the treadmill or any of its parts.
• To avoid equipment malfunction, please wait at least one hour
before using the treadmill if you move it between hot and cold
environments.
• To avoid electrocution, avoid placing the treadmill near a pool
or spa or in an area with high humidity.
• Do not operate the treadmill where aerosol (spray) products are
used or where oxygen is being administered.
• Do not operate the treadmill near incandescent objects.
• Always unplug the treadmill after use.
• All repairs to the treadmill must be performed by authorized
technicians. Any unauthorized repairs or modifications are not
allowed.
• Do not move or pull the treadmill by the power cord or plug.
To Next Page
Loading...
