NOTE:
Turn on the speaker. You will hear the sound cue and the status
indicator will start flashing BLUE.
Plug one end of the 3.5mm audio cable into the 3.5mm cable port on
the back of the speaker (under the rubber cover). Plug the other end
into the 3.5mm jack on your device. You will hear the sound prompt
and the status indicator will be steady BLUE. Now you can play
music and audio.
To mute the audio, press the PLAY / PAUSE button.
On-device control is not supported for the NEXT, PREVIOUS
and PAUSE functions when using the 3.5 mm audio cable.
Phone calls management using the PLAY / PAUSE button
is not supported as well. You will need to make adjustments
using your smart device.
USB MODE
The TREBLAB HD-Max speaker can play music from the USB flash
drives up to 512GB. All you need to do is to copy music to the
memory stick (in folders or just to the root), insert it into the USB-A
port on the back of the speaker (under the rubber cover). You will
hear the sound prompt and the state indicator will turn BLUE.
To start playing from the USB flash drive, press the PLAY / PAUSE
button.
The playlist is arranged according to song addition date (the older
tracks play first).
To Next Page
Loading...
