PHONE CALLS
CHARGING
When the battery is running low, you will hear a sound signal.
TREBLAB HD-Max may be used while charging in Wireless Mode,
3.5mm audio cable and USB modes.
To charge the speaker, plug one end of the supplied cable into the
TYPE-C charging port under the rubber cover on the back of the
speaker. Plug the other end of the charging cable into a wall adapter
or USB port on a laptop. It takes up to 5.5 hours to fully charge.
Once plugged in, the charging indicators will start flashing slowly
NOTE: For better call quality, face the microphone when you speak.
TREBLAB HD-Max can be used to make and receive phone calls when
connected wirelessly. Audio playback will be paused during calls.
To answer a call:
To end a call:
To reject a call:
Press the PLAY / PAUSE button during an
incoming call.
Press the PLAY / PAUSE button when on a call.
Press and hold the PLAY / PAUSE button for
2 seconds during an incoming call.
To Next Page
Loading...
