RE-CONNECTING
TRUE WIRELESS STEREO (TWS) - PAIRING
TWO SPEAKERS
After the initial pairing, the speaker will automatically connect to the
previously paired device when turned on again. If reconnection does
not happen automatically, the speaker will start looking for any
other previously paired device within the effective distance range.
TREBLAB HD-Max can remember up to 8 recently paired devices.
The TWS technology allows you to use two speakers paired
wirelessly to create a wireless dual-channel system, delivering a true
stereo sound effect. While using this function, one speaker (Primary,
left channel) is paired with a smart device, the other (Secondary,
right channel) speaker is paired with the Primary speaker.
• Turn ON both speakers and make sure that none of them is
connected to any device (both speakers’ status indicators should
blink BLUE). To disconnect, press and hold the PAIRING button
for 2 seconds.
• Select the speaker that will connect to the device (Primary) and
double-press the PAIRING button on it. The TWS indicator on it
should start blinking BLUE.
To Next Page
Loading...
