PAIRING
You can pair the WX8 earbuds with your device either
together or separately. Using only one earbud at a time
will help you to extend the overall playtime. Please
read the instructions below to make the pairing process
smooth and easy.
To pair both earbuds
1. Open the case lid and take the earbuds out of the
case. The white LEDs will light up on both earbuds
and, a few seconds later, the white LED will start flashing
on one of the earbuds.
2. Activate Bluetooth on the device, scan/search for
TREBLAB WX8, and click CONNECT.
3. If prompted by your device to connect, select Yes.
To Next Page
Loading...
