VOICE ASSISTANTS SUPPORT
TREBLAB WX8 earphones are compatible with Siri,
Google Voice Assistant and others. To use the voice
assistant, tap on either earbud’s Touch panel three
times.
RESET TO THE FACTORY SETTINGS
You can reset the WX8 earbuds to the factory default
settings by cleaning up the pairing list with the last 6
connected to WX8 devices.
Make sure that the earbuds are disconnected from
the source device. Tap five times on both earbuds’
Touch panel. The white LEDs will light up on both
earbuds and you will hear the “Power Off” voice prompt.
The earbuds’ memory is returned to the factory settings
now.
To Next Page
Loading...
