treesse Fusion Spa 230 - Installation; Description of Main Components; Qualifications of the Installer

10
Fusion Spa minipool
EN
Installation
1
2
7
3
10
9
4
6
5
9
8
1
DESCRIPTION OF MAIN COMPONENTS
1 Control Panel
2 Compensation tank
3 Sand lter
4 Whirlpool pump
5 Overow edge
6 Electronic control units
7 Compensation tank inspection
8 Heater
9 Drain valve
10 Ozone
2
QUALIFICATIONS OF THE INSTALLER
Before installation it is recommended to carefully read the safety warnings at the beginning of this manual
and to always operate in perfect physical and mental condition.
The installer, qualied and authorised by the Manufacturer, must carry out the operations based on his or her
professional qualications. Any activities for which he or she is not qualied (e.g., plumbing or electrical connections)
must be performed by specic and qualied professionals so as not to risk their own safety and that of others who
interact with the equipment.