treesse Fusion Spa 230 - Transport and Position; Moving

6
Fusion Spa minipool
EN
8x
Transport and position
1
MOVING
To move the minipool to the place of installation a
suitable lifting device (e.g., pallet jack) is required. As an
alternative, provide for the availability of eight people.
If the installation is indoor, before moving the minipool
make sure that it can easily pass through the doors and
hallways to reach the desired place of installation.
Movement must be carried out using personal
protective equipment (e.g., gloves, safety shoes,
etc.) and taking all the necessary safety precau-
tions for those involved and to not damage the minipool.
During transport, lift the minipool by holding it
exclusively by the edge and NEVER by holding the
plumbing lines or operational parts (e.g., pumps, etc.).
During movement, the surrounding area must be
kept free of persons not involved in the operation,
animals or objects (e.g., packaging, etc.) that
could get in the way.
The gures in the manual always depict the Fusion Spa 230.
Unless otherwise specied, the installation of the other models must be carried out in a similar manner.