98
IT
minipool Quarz
PROBLEM POSSIBLE CAUSE SOLUTION
Cloudy water, not very clear or dust
in suspension
• Water with unbalanced values
(hardness, pH, alkalinity).
• Incorrect or infrequent water treat-
ment.
• Filter cartridges that are excessively
dirty.
• Excessive dirt brought in by users.
• Weather (if installed outdoors).
• Refer to the chapters:
1
page 84
2
page 88
3
page 92
• Take a shower before entering the
minipool to remove residues of
cosmetics or lotions.
• Cover the minipool when not in
use.
Foam on the surface of the minipool
• Residues from sunscreens, cosmet-
ics, soaps.
• Water with unbalanced values
(hardness, pH, alkalinity).
• Overly soft water (lower hardness
to 7°f).
• Take a shower before entering the
minipool to remove residues of
cosmetics or lotions.
• Refer to the chapters:
1
page 84
2
page 88
Slippery bottom and walls, the pres-
ence of algae, greenish colour
• Water with unbalanced values
(hardness, pH, alkalinity).
• Incorrect or infrequent water treat-
ment
Refer to the chapters:
1
page 84
2
page 88
Bad odour or mould
• Water with unbalanced values
(hardness, pH, alkalinity).
• Incorrect or infrequent water treat-
ment.
• Water changed too infrequently.
• Canvas cover not cleaned well.
• Refer to the chapters:
1
page 84
2
page 88
• For the cleaning of the canvas
cover, see page 96
Unstable pH value
A very unstable pH could be caused
by a bad balance of total alkalinity
(Complete Alkalimetric Titre - CAT).
Refer to the chapters:
1
page 84
Irritation of eyes, mucous membranes
and skin
• Water with unbalanced values
(hardness, pH, alkalinity).
• Water with disinfectant treatments
that are too aggressive or too
concentrated.
Refer to the chapters:
1
page 84
2
page 88
The whirlpool pumps start by them-
selves
The minipool has an automatic mixing function that in sequence activates
the various whirlpool pumps to mix the water in the bathtub. This provides
for a more effective ltering action.
Below are some problems you may encounter while using the minipool.
If the solutions offered do not solve the problem contact your dealer or the minipool manufacturer for suggestions.
Troubleshooting
To Next Page
Loading...
