Instructions for Use and Maintenance 120H-HY – 190H-HY (0901)
1.5 Technical data
Technical data / model 120H-HY 150H-HY 190H-HY
Working width, mm 1270 1570 1890
Frame height, mm 590 590 590
Cutting auger, number 1 1 1
Cutting auger, ∅ mm
340 340 340
Ejecting rotor, ∅ mm
450 450 450
Operation of gear box, type Hydraulic Hydraulic Hydraulic
Hydraulic motor, type Orbit motor Orbit motor Orbit motor
Recommended oil flow, l/min 35-55 45-65 55-80
Max operating pressure, Bar 175 175 175
Rotating ejector tube, standard Hydraulic Hydraulic Hydraulic
Flap control, standard Mechanical Mechanical Mechanical
Weight, basic unit, kg 315 375 410
Due to continuous product development, any data is subject to change without prior notice.
trejonindustries.se
9
To Next Page
Loading...